Frequently Asked Questions
FLAT Equalizers

FLAT Equalizers can be purchased from our partner resellers around the world. Find your local reseller.

Yes. Notify us of your interest in becoming a reseller and we will contact you to discuss opportunities.

Yes. They will fit any table that already has removable 1/4″, 5/16″, 3/8″ or M6, M8, M10 feet. To ensure a fit, please check your existing foot thread size using the thread size guide and select the corresponding Equalizer thread size.

Equalizers adjust up to 1/4” / 6mm.

Yes. Equalizers are ideal for use on uneven surfaces, outdoors or indoors.

FLAT Equalizers provide a stabilisation and table top alignment solution for table bases already owned by an establishment. FLAT table bases are a superb solution for businesses looking for new tables.

The technology found in Equalizers and table bases is similar. FLAT table bases automatically stabilise, whereas Equalizers require a single, gentle press on the table top to stabilise.

FLAT table bases can be adjusted up to 8mm, whereas Equalizers can be adjusted up to 6mm.

If the table is unstable, simply press down on the table top to stabilise it.

Align two table tops by tilting and pressing down one of the table tops (which compresses the feet) so that it is at the same level as its counterpart. Alternatively, you can lift the other table top to the same height. Its feet will extend and lock.

Equalizers, once locked in place, will stay locked under substantial pressure.  Once an alignment is made and the feet are locked, each foot can withstand up to 13kgs/28.5lbs of pressure before the locks release. If more than that amount is exerted, misalignment can occur.

To function optimally, we recommend loads of no more than 28.5 lbs/13kgs per Equalizer. 

Each Equalizer can hold up to 125 lbs/56.7kg but performance could be affected above the 28.5 lbs/13kgs per Equalizer threshold.

Your table may have damaged or bent legs or have legs of different heights. Some of the adjustment range of the EQ may already be used due to an uneven surface.

Equalizers are 49mm (including the thread). Once screwed into the table, the average compressed height is 37mm/1.45″. Depending on the table weight the the height may be lower or higher than the average.

We have 3 metric thread sizes (M6, M8 & M10) and 3 UNC (standard) thread sizes (1/4”, 5/16” & 3/8”). Standard thread sizes are commonly found in the USA with metric threads commonly found outside of the USA. Before ordering Equalizers, identify the size of your existing table foot thread size using the thread size guide.

We recommend asking your local dealer or hardware store. You can also download our thread size guide, which if printed to scale, will give you an indication of your current table foot thread size.

They will fit any table that already has removable M6, M8 & M10 or 1/4”, 5/16”, 3/8” feet. To ensure a fit please check your existing foot thread size and select the corresponding Equalizer thread size.

The functionality of Equalizers is largely dependent on the state of your existing tables. Tables that are damaged, loose, bent or uneven can inhibit the performance of the Equalizer.

FLAT Equalizers come with a 2-year warranty against manufacturer’s defects.

We have not designed or tested Equalizers to be used on other items. We cannot warrant, guarantee or recommend their use for any other application other than what is designated. In the future, FLAT Equalisers may be suitable for other uses and applications.

It depends on the table, the depth of the thread hole in your existing table, and how extended your feet are. The average installation height of the Equalizer (without the thread and partially compressed) is 37mm/1.45”.

Equalizers are made from high-impact resistant plastics and a stainless steel thread.

The hydraulic fluid inside Equalizers is organic and non-hazardous.

Equalizers are made from highly durable materials and have been tested to and proven to exceed international standards for durability, strength, safety and stability. However, it can be broken if abused or used incorrectly.

The washers reduce the likelihood of the Equalizer coming loose from the table base.